24 controllers are not powerful enough?
During freight transportation, traditional electric tricycles often fall into a dilemma due to the limited number of controller tubes: when the 12-tube controller pulls a heavy load and climbs the bridge, the power of the Electric tricycle motor is "halved", the controller overheats and alarms, and the Electric tricycle rear axle frequently makes abnormal noises due to torque imbalance. Even the Electric four-wheel vehicle cannot escape the dilemma of "discounted" endurance. The driver smiled bitterly: "When pulling half a ton of goods through the tunnel, the motor shakes like a sieve, and the controller flashes like firecrackers!"
Our 24-tube Electric tricycle solution reconstructs the power logic with "multi-tube matrix + full-chain optimization"! The 24-tube Electric Tricycle Controller is like a precision symphony orchestra, synchronously regulating the current output, and the torque is increased by 80% compared with the traditional 12-tube solution; with a 3000W permanent magnet synchronous electric tricycle motor and a quenched Rear Axle, when the load is 1500 pounds and climbing a 25° slope, the motor temperature rise is reduced by 40℃, and the rear axle gear life is extended by 3 times. Whether it is an electric tricycle shuttling through the narrow alleys of the old city or an electric four-wheel vehicle crossing a mountain road, the power response speed is increased to 0.2 seconds. Hebei Coal Transport Team tested: "After changing to a 24-tube model, we can load 600 more pounds per trip and repair the car 3 times less per month!"
Three major technological breakthroughs
① Matrix tube drive: 24 tubes in parallel design to achieve millisecond current distribution, starting torque up to 100N·m, heavy-load start and stop without setbacks;
② Superconducting heat dissipation system: The controller has built-in graphene heat sink + temperature control fan, automatically starts the strong cooling mode at 70℃, IP68 waterproof level can wade 50cm;
③ Rear axle enhancement technology: adopts automotive-grade differential structure, double-row tapered roller bearing support, and the load-bearing limit is increased to 2000kg.
Golden rules for operation and maintenance
1. Tube health inspection: Scan the 24-tube module with an infrared thermometer every week (temperature difference ≤5℃) to prevent single-tube overload;
2. Motor heat dissipation management: Clean the heat dissipation holes with compressed air after continuous heavy load, and replace the bearing grease every 5,000 kilometers;
3. Rear axle oil maintenance: Check the gear oil status every 1,500 kilometers (replace it if it turns black), and the oil level must be kept between the upper and lower limits of the dipstick.
